Bissell CrossWave Cordless Max 2593 showing “No suction although the dirty tank is empty” has a specific manufacturer-backed troubleshooting path. Match the exact light, sound or behaviour before cleaning, resetting or ordering anything. Confirm “No suction although the dirty tank is empty” exactly, including the full number, colour, flash order, spoken phrase or screen text. If any element differs, use the guide for that other indication instead. Bissell — Cordless Max no suction documents this condition for Bissell CrossWave Cordless Max 2593. It identifies the branch to test, but it does not by itself prove that a battery, motor, board, sensor, dock or replaceable part has failed. Clean the brush roll, suction channel, dirty-tank screen and filter; leave any washed filter fully dry. Refit filter, tank lid, tank and brush window until each clicks, because a small seating gap breaks suction. Switch off and unplug or undock the cleaner before opening a tank, cover or brush area. Wipe spills at once, keep liquid away from charging contacts and never run it with a safety cover removed. Run only one normal start, charge or cleaning cycle after the documented check. If “No suction although the dirty tank is empty” returns unchanged, record the code, model and serial number and contact authorised Bissell support instead of repeating resets or guessing a part.
Models covered
Safety first
- Switch off and unplug or undock the cleaner before opening a tank, cover or brush area. Wipe spills at once, keep liquid away from charging contacts and never run it with a safety cover removed.
What the symptom may indicate
Checks in the right order
- Identify the exact indication
Confirm “No suction although the dirty tank is empty” exactly, including the full number, colour, flash order, spoken phrase or screen text. If any element differs, use the guide for that other indication instead.
- Safe check to perform
Clean the brush roll, suction channel, dirty-tank screen and filter; leave any washed filter fully dry. Refit filter, tank lid, tank and brush window until each clicks, because a small seating gap breaks suction.
- What to do after the test
Run only one normal start, charge or cleaning cycle after the documented check. If “No suction although the dirty tank is empty” returns unchanged, record the code, model and serial number and contact authorised Bissell support instead of repeating resets or guessing a part.
Stop and get qualified help when
- Stop for liquid near a plug, charger or battery, a cracked tank or body leak, burning smell, smoke, hot cable, damaged cover or uncontrolled brush movement. Run only one normal start, charge or cleaning cycle after the documented check. If “No suction although the dirty tank is empty” returns unchanged, record the code, model and serial number and contact authorised Bissell support instead of repeating resets or guessing a part.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 3 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Bissell — Bissell, Cordless Max no suction: “If you are experiencing no/low suction, follow these steps to resolve” This exact manufacturer wording anchors the check for Bissell CrossWave Cordless Max 2593.
Last checked: 30 August 2026