For Bissell CrossWave Cordless Max 2593, “Two white lights blinking” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check. Bissell's official material anchors this branch with the exact wording “2 White Lights Blinking”. That wording identifies the documented condition; it does not by itself prove that a battery, motor, board, sensor, dock or other replaceable component has failed. Keep “Two white lights blinking” separate from every other alert on the same appliance. Match the full number, colour, flash order, spoken phrase or display text before acting; a different pattern owns a different diagnosis and may have a different stop condition. Remove the cleaner from the dock, switch it off and check that contacts are clean and dry. Reconnect the powered dock and use only the three dock/undock cycles specified by Bissell, then stop if two white lights still blink. If the exact “Two white lights blinking” condition clears and the appliance completes one normal start, charge or cleaning cycle, stop the test and monitor it. If it returns unchanged, do not repeat resets or infer a part: record the code, model and serial number for authorised Bissell support. Switch off and unplug or undock the cleaner before opening a tank, cover or brush area. Wipe spills at once, keep liquids away from charging contacts and never run the machine with a safety cover removed.
Models covered
Safety first
- Switch off and unplug or undock the cleaner before opening a tank, cover or brush area. Wipe spills at once, keep liquids away from charging contacts and never run the machine with a safety cover removed.
What the symptom may indicate
Checks in the right order
- Confirm the exact code or pattern
For Bissell CrossWave Cordless Max 2593, “Two white lights blinking” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check.
- Make the appliance safe
Switch off and unplug or undock the cleaner before opening a tank, cover or brush area. Wipe spills at once, keep liquids away from charging contacts and never run the machine with a safety cover removed.
- Perform the official user check
Remove the cleaner from the dock, switch it off and check that contacts are clean and dry. Reconnect the powered dock and use only the three dock/undock cycles specified by Bissell, then stop if two white lights still blink.
- Retest once and decide
If the exact “Two white lights blinking” condition clears and the appliance completes one normal start, charge or cleaning cycle, stop the test and monitor it. If it returns unchanged, do not repeat resets or infer a part: record the code, model and serial number for authorised Bissell support.
Stop and get qualified help when
- Stop immediately for liquid near a plug, charger or battery, a tank or body leak, burning smell, smoke, hot cable, damaged cover, uncontrolled brush movement, or the same alert after the one documented test. Use authorised service. If the exact “Two white lights blinking” condition clears and the appliance completes one normal start, charge or cleaning cycle, stop the test and monitor it. If it returns unchanged, do not repeat resets or infer a part: record the code, model and serial number for authorised Bissell support.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 4 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Bissell — Bissell's official CrossWave Cordless Max light indications for Bissell CrossWave Cordless Max 2593 states exactly: “2 White Lights Blinking” This short quotation is the source anchor for this intent.
Last checked: 30 August 2026