Dyson V15 Detect Absolute filter wash alert remains after cleaning: use the checks below to verify whether the alert comes from a dirty, damp or incorrectly seated filter before ordering a part. Dyson's official support material for Dyson V15 Detect Absolute covers “filter wash alert remains after cleaning” and the user-accessible checks used below. What to distinguish: verify whether the alert comes from a dirty, damp or incorrectly seated filter Safe check: remove the filter as documented, rinse with cold water only when permitted, air-dry fully and lock it back into its indexed position Stop for a burning smell, hot or damaged battery, liquid ingress, exposed wire or a fault that returns after one official retest.

Models covered

Safety first

  • Switch off and unplug, or remove the battery only where the manual permits it. Keep water away from motors, contacts and non-washable filters.

What the symptom may indicate

What this exact symptom meansDyson V15 Detect Absolute filter wash alert remains after cleaning: use the checks below to verify whether the alert comes from a dirty, damp or incorrectly seated filter before ordering a part.
What to rule out firstverify whether the alert comes from a dirty, damp or incorrectly seated filter

Checks in the right order

  1. Make the appliance safe

    Switch off and unplug, or remove the battery only where the manual permits it. Keep water away from motors, contacts and non-washable filters.

  2. Run the official user check

    remove the filter as documented, rinse with cold water only when permitted, air-dry fully and lock it back into its indexed position

  3. Retest once and decide

    verify whether the alert comes from a dirty, damp or incorrectly seated filter

Stop and get qualified help when

  • Stop for a burning smell, hot or damaged battery, liquid ingress, exposed wire or a fault that returns after one official retest.

Next step

Repair, replace a part, or arrange a diagnosis?

Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.

Resolve it without buying anything

Complete the 3 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.

Replace only the confirmed part

If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.

Arrange a diagnosis before replacing the appliance

Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.

Sources used

  • Dyson — Dyson's official support material for Dyson V15 Detect Absolute covers “filter wash alert remains after cleaning” and the user-accessible checks used below.

Last checked: 30 August 2026