The blinking nozzle icon on the EFW71311 points to a brush roll that is missing, fitted incorrectly or entangled with hair or debris. Switch off, remove the accessible brush roll, clear both ends and the channel, then refit it until its cover is fully seated. A damaged roll, cover or drive that makes the icon return needs an Electrolux check; do not turn the drive by force. This exact symptom does not by itself prove that an internal replaceable part has failed. Switch off before removing tanks, filters, covers or the brush roll. Disconnect the stand from mains before checking its adaptor and stop for heat, damaged wiring or liquid near electrical contacts.
Models covered
Safety first
- Switch off before removing tanks, filters, covers or the brush roll. Disconnect the stand from mains before checking its adaptor and stop for heat, damaged wiring or liquid near electrical contacts.
What the symptom may indicate
Checks in the right order
- Confirm the exact state
The blinking nozzle icon on the EFW71311 points to a brush roll that is missing, fitted incorrectly or entangled with hair or debris.
- Apply the manufacturer check
Switch off, remove the accessible brush roll, clear both ends and the channel, then refit it until its cover is fully seated.
- Use the result
A damaged roll, cover or drive that makes the icon return needs an Electrolux check; do not turn the drive by force.
Stop and get qualified help when
- Stop if a powered part becomes hot, smells electrical, leaks toward the battery or remains blocked after the accessible cleaning step.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 3 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Electrolux — Electrolux's official support material documents “Electrolux EFW71311 nozzle icon keeps blinking” and the bounded user checks retained here.
- Electrolux — Electrolux's official support material documents “Electrolux EFW71311 nozzle icon keeps blinking” and the bounded user checks retained here.
Last checked: 30 August 2026