Electrolux Ergorapido ZB3301 showing “Fourth LED turns red: fault, not charge level” has a specific manufacturer-backed troubleshooting path. Match the exact light, sound or behaviour before cleaning, resetting or ordering anything. Confirm “Fourth LED turns red: fault, not charge level” exactly, including the full number, colour, flash order, spoken phrase or screen text. If any element differs, use the guide for that other indication instead. Electrolux — Ergorapido LED meanings documents this condition for Electrolux Ergorapido ZB3301. It identifies the branch to test, but it does not by itself prove that a battery, motor, board, sensor, dock or replaceable part has failed. Count the indicators before acting: the first three represent 25, 50 and 100 percent charge, while the fourth illuminates only for a malfunction. Stop, clear the accessible brush and airflow path, cool fully and seek service if the fourth light returns. Switch the vacuum off and disconnect its charger or mains plug before removing an accessible tool, bin, filter or brush. Never open the motor body, charger or battery pack. Run only one normal start, charge or cleaning cycle after the documented check. If “Fourth LED turns red: fault, not charge level” returns unchanged, record the code, model and serial number and contact authorised Electrolux support instead of repeating resets or guessing a part.
Models covered
Safety first
- Switch the vacuum off and disconnect its charger or mains plug before removing an accessible tool, bin, filter or brush. Never open the motor body, charger or battery pack.
What the symptom may indicate
Checks in the right order
- Identify the exact indication
Confirm “Fourth LED turns red: fault, not charge level” exactly, including the full number, colour, flash order, spoken phrase or screen text. If any element differs, use the guide for that other indication instead.
- Safe check to perform
Count the indicators before acting: the first three represent 25, 50 and 100 percent charge, while the fourth illuminates only for a malfunction. Stop, clear the accessible brush and airflow path, cool fully and seek service if the fourth light returns.
- What to do after the test
Run only one normal start, charge or cleaning cycle after the documented check. If “Fourth LED turns red: fault, not charge level” returns unchanged, record the code, model and serial number and contact authorised Electrolux support instead of repeating resets or guessing a part.
Stop and get qualified help when
- Stop for a swollen or unusually hot battery, burning or electrical smell, smoke, liquid ingress, a damaged lead, sparking or harsh motor noise. Run only one normal start, charge or cleaning cycle after the documented check. If “Fourth LED turns red: fault, not charge level” returns unchanged, record the code, model and serial number and contact authorised Electrolux support instead of repeating resets or guessing a part.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 3 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Electrolux — Electrolux, Ergorapido LED meanings: “Le 4ème voyant ne s'éclaire qu'en cas de dysfonctionnement de l'appareil.” This exact manufacturer wording anchors the check for Electrolux Ergorapido ZB3301.
Last checked: 30 August 2026