Wet dishes after ESF6571 Eco can result from low final temperature, no rinse aid, nested items or unloading too soon. Confirm the visible symptom before resetting; filters, loading, detergent, water supply and door alignment are safe checks, internal wiring is not. Eco saves energy with lower heat, so rinse aid and an open water path off cup bases become more important for evaporation. Plastic droplets alone are common; if glass and ceramic are also cold and soaking wet, note whether the cycle finished and any code appeared. Fill rinse aid, angle cups and bowls, separate nested pieces, choose the documented drying option and wait after programme end before unloading the lower rack first. Test one mixed load. If every material remains cold and wet or a heat code appears, contact Electrolux rather than ordering a heater.
Models covered
Safety first
- Cancel, switch off, close the water valve and let hot dishes cool. Wear gloves near the filter; never tilt a built-in appliance or remove its base or side panels.
What the symptom may indicate
Checks in the right order
- Confirm before acting
Eco saves energy with lower heat, so rinse aid and an open water path off cup bases become more important for evaporation.
- Make the appliance safe
Cancel, switch off, close the water valve and let hot dishes cool. Wear gloves near the filter; never tilt a built-in appliance or remove its base or side panels.
- Apply the official check
Fill rinse aid, angle cups and bowls, separate nested pieces, choose the documented drying option and wait after programme end before unloading the lower rack first.
- Retest once and decide
Test one mixed load. If every material remains cold and wet or a heat code appears, contact Electrolux rather than ordering a heater.
Stop and get qualified help when
- Stop for water in the base, an uncontrolled leak, heat or motor code, burning smell, damaged cable or a fault that returns after one empty test.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 4 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Electrolux — Electrolux's official support material documents this exact symptom path for ESF6571; the procedure here keeps only user-accessible checks.
Last checked: 30 August 2026