A short quiet period after starting the ESF6571 can be programme preparation, delayed start or water heating; it is not automatically a failed pump. Confirm the visible symptom before resetting; filters, loading, detergent, water supply and door alignment are safe checks, internal wiring is not. The control may wait for the selected delay, complete an initial drain or bring incoming water to the required condition before circulation begins. Check whether a delay indicator is set and whether the display still changes. A completely frozen panel, code or leak is not a normal wait. Cancel an unintended delay, run the nearby hot tap until warm, close the door firmly, press Start once and allow the programme to progress without repeated opening. Time the actual pause once. If no fill or wash sound ever follows, or the display stops changing, record the stage and contact Electrolux.
Models covered
Safety first
- Cancel, switch off, close the water valve and let hot dishes cool. Wear gloves near the filter; never tilt a built-in appliance or remove its base or side panels.
What the symptom may indicate
Checks in the right order
- Confirm before acting
The control may wait for the selected delay, complete an initial drain or bring incoming water to the required condition before circulation begins.
- Make the appliance safe
Cancel, switch off, close the water valve and let hot dishes cool. Wear gloves near the filter; never tilt a built-in appliance or remove its base or side panels.
- Apply the official check
Cancel an unintended delay, run the nearby hot tap until warm, close the door firmly, press Start once and allow the programme to progress without repeated opening.
- Retest once and decide
Time the actual pause once. If no fill or wash sound ever follows, or the display stops changing, record the stage and contact Electrolux.
Stop and get qualified help when
- Stop for water in the base, an uncontrolled leak, heat or motor code, burning smell, damaged cable or a fault that returns after one empty test.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 4 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Electrolux — Electrolux's official support material documents this exact symptom path for ESF6571; the procedure here keeps only user-accessible checks.
Last checked: 30 August 2026