If an ESL614 displays i60, Electrolux classifies the message in the water-heating path; filters or detergent do not clear an internal heat fault. Confirm the visible symptom before resetting; filters, loading, detergent, water supply and door alignment are safe checks, internal wiring is not. The control has not confirmed the expected water-temperature rise during the programme. Record the exact characters as i60. Poor drying without a code can still be loading, rinse aid or programme choice and uses another guide. Cancel, let the tub cool, switch the ESL614 off and disconnect power for thirty seconds, then restore it once without removing panels. If i60 returns, stop using heated cycles and give Electrolux the exact model and code for qualified diagnosis; do not order a heater from the code alone.
Models covered
Safety first
- Cancel, switch off, close the water valve and let hot dishes cool. Wear gloves near the filter; never tilt a built-in appliance or remove its base or side panels.
What the symptom may indicate
Checks in the right order
- Confirm before acting
The control has not confirmed the expected water-temperature rise during the programme.
- Make the appliance safe
Cancel, switch off, close the water valve and let hot dishes cool. Wear gloves near the filter; never tilt a built-in appliance or remove its base or side panels.
- Apply the official check
Cancel, let the tub cool, switch the ESL614 off and disconnect power for thirty seconds, then restore it once without removing panels.
- Retest once and decide
If i60 returns, stop using heated cycles and give Electrolux the exact model and code for qualified diagnosis; do not order a heater from the code alone.
Stop and get qualified help when
- Stop for water in the base, an uncontrolled leak, heat or motor code, burning smell, damaged cable or a fault that returns after one empty test.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 4 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Electrolux — Electrolux's official support material documents this exact symptom path for ESL614; the procedure here keeps only user-accessible checks.
Last checked: 30 August 2026