EH0 or EHO on an Electrolux washer points to unstable or unsuitable mains power, socket trouble or an electrical appliance fault. Use the code to narrow the fault without opening the cabinet. Check the household installation and user-accessible items first, then run a single short test only when the appliance is dry and safe. What the alert means: The washer is receiving voltage or frequency outside its expected range, or the household connection cannot supply it reliably. What to distinguish first: Test the wall socket with another ordinary appliance and note any tripped breaker; do not use an extension or multi-socket adapter. 1. Confirm the exact symptom — The washer is receiving voltage or frequency outside its expected range, or the household connection cannot supply it reliably. 2. Prepare safely — Cancel the cycle, unplug the washer and close the water tap before checking hoses, filters, detergent or visible seals. 3. Apply the official check — Unplug the washer for at least 30 seconds, reconnect it directly to a sound grounded wall socket and select one short programme. 4. Interpret one retest — If EH0 returns, stop using the washer and have the supply checked by an electrician before appliance service. The official Electrolux procedure identifies this exact symptom and supports the checks above. Do not remove cabinet panels and do not run another cycle while water is present under or inside the appliance base. Call service for a recurring code, visible wiring damage, breaker trip, uncontrolled leak or a door that will not secure.
Models covered
Safety first
- Do not remove cabinet panels and do not run another cycle while water is present under or inside the appliance base.
What the symptom may indicate
Checks in the right order
- Confirm the exact symptom
The washer is receiving voltage or frequency outside its expected range, or the household connection cannot supply it reliably.
- Prepare safely
Cancel the cycle, unplug the washer and close the water tap before checking hoses, filters, detergent or visible seals.
- Apply the official check
Unplug the washer for at least 30 seconds, reconnect it directly to a sound grounded wall socket and select one short programme.
- Interpret one retest
If EH0 returns, stop using the washer and have the supply checked by an electrician before appliance service.
Stop and get qualified help when
- Call service for a recurring code, visible wiring damage, breaker trip, uncontrolled leak or a door that will not secure.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 4 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Electrolux — The official Electrolux procedure identifies this exact symptom and supports the checks above.
Last checked: 30 August 2026