If iRobot Roomba 980 / Combo j7+ reports Charging Error 2: over-current fault, use these manufacturer-documented checks to identify the cause before replacing a part or requesting service. The official sources listed below tie “reports Charging Error 2: over-current fault” to the exact related models and to this shared first-line control path. Charging Error 2 is an over-current charging fault; liquid damage or a non-authentic battery must be ruled out. Stop the robot and unplug the dock before touching the battery compartment or charging contacts. Keep liquids and metal tools away from every contact. Do not open the battery, bridge contacts or continue charging after heat, swelling, liquid exposure or a burnt smell; use iRobot support if the error remains. After the one official correction, place the robot squarely on its powered dock and observe one uninterrupted charging attempt before changing anything else. Stop charging for a hot or swollen battery, liquid exposure, burnt smell, damaged dock cable, sparking contacts or an error that returns after one official test.
Models covered
Safety first
- Stop the robot and unplug the dock before touching the battery compartment or charging contacts. Keep liquids and metal tools away from every contact.
What the symptom may indicate
Checks in the right order
- Make the appliance safe
Stop the robot and unplug the dock before touching the battery compartment or charging contacts. Keep liquids and metal tools away from every contact.
- Apply the official user check
Do not open the battery, bridge contacts or continue charging after heat, swelling, liquid exposure or a burnt smell; use iRobot support if the error remains.
- Retest once and decide
After the one official correction, place the robot squarely on its powered dock and observe one uninterrupted charging attempt before changing anything else.
Stop and get qualified help when
- Stop charging for a hot or swollen battery, liquid exposure, burnt smell, damaged dock cable, sparking contacts or an error that returns after one official test.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 3 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- iRobot — iRobot's charging chart maps Errors 1, 2, 3, 4/5, 6/7, 8, 9, 11, 17 and 19 to detection, current, temperature, battery or timeout checks.
- iRobot — iRobot's official owner-guide page states that its Roomba 900-series material applies to Roomba 960 and 980, anchoring this exact Roomba 980 scope.
- iRobot — iRobot's official product page identifies Roomba Combo j7+ as item C755020 and documents its lithium-ion battery and Clean Base charging system.
Last checked: 30 August 2026