Models covered
Start with the full Melitta Passione model code and the precise “bean symbol flashes after grinding” display pattern; a similar warning may require a different check. Limit this Melitta Passione check to accessible containers, the removable brew path and the milk or drainage parts named in the manual. What this exact symptom means: the machine detected too few or no ground beans during the grinding step, most often because the bean container is empty.
What to distinguish first: Confirm that the displayed or observed condition exactly matches “bean symbol flashes after grinding” before changing anything. 1. Confirm the model and signal — Confirm that the displayed or observed condition exactly matches “bean symbol flashes after grinding” before changing anything. 2. Prepare the appliance safely — Let Melitta Passione finish its normal shutdown, unplug it, allow hot surfaces to cool and empty the drip tray before removing an accessible part.
3. Carry out the official user check — Fill the bean container with suitable dry beans, make sure they move freely toward the grinder and restart one grinding cycle. 4. Interpret one controlled retest — Refit Melitta Passione exactly as documented and perform one short rinse or drink test. The cited Melitta Passione manufacturer documentation links “bean symbol flashes after grinding” to the user-level procedure described here.
Before checking Melitta Coffee machine
- Protect Melitta Passione's electrical openings and grinder from water; a brew unit, valve or hot steam fitting that resists must not be forced.
What this symptom can mean on Melitta Coffee machine
4 checks for Melitta Coffee machine, starting with Confirm the model and signal
- Confirm the model and signal
Confirm that the displayed or observed condition exactly matches “bean symbol flashes after grinding” before changing anything.
- Prepare the appliance safely
Let Melitta Passione finish its normal shutdown, unplug it, allow hot surfaces to cool and empty the drip tray before removing an accessible part.
- Carry out the official user check
Fill the bean container with suitable dry beans, make sure they move freely toward the grinder and restart one grinding cycle.
- Interpret one controlled retest
Refit Melitta Passione exactly as documented and perform one short rinse or drink test. If “bean symbol flashes after grinding” returns, stop resetting and arrange service.
When to stop checking Melitta Coffee machine
- End the Melitta Passione check if “bean symbol flashes after grinding” persists, the grinder is obstructed, hot water leaks or power trips; those signs require service.
Next step
After checking Melitta Coffee machine: repair, part or service?
Treat “Melitta Passione: bean symbol flashes after grinding” as a condition to verify. The first of the 4 documented checks is “Confirm the model and signal”; its result guides what follows.
Finish the checks before buying
Complete the Melitta Coffee machine sequence, starting at “Confirm the model and signal”. When the symptom clears without a remaining alert, no replacement is indicated.
Arrange a diagnosis if a stop condition appears
Do not condemn Melitta Coffee machine from “Melitta Passione: bean symbol flashes after grinding” alone. Stop at the warnings above and let a qualified diagnosis establish whether repair remains safe and proportionate.
Sources used
- Melitta · source in French — The cited Melitta Passione manufacturer documentation links “bean symbol flashes after grinding” to the user-level procedure described here.
Last checked: 30 August 2026