Models covered
Start with the full Melitta Passione OT model code and the precise “drip-tray symbol stays on after emptying” display pattern; a similar warning may require a different check. Limit this Melitta Passione OT check to accessible containers, the removable brew path and the milk or drainage parts named in the manual. What this exact symptom means: the tray sensor only records emptying while the machine is switched on, so emptying it while off leaves the reminder active.
What to distinguish first: Confirm that the displayed or observed condition exactly matches “drip-tray symbol stays on after emptying” before changing anything. 1. Confirm the model and signal — Confirm that the displayed or observed condition exactly matches “drip-tray symbol stays on after emptying” before changing anything. 2. Prepare the appliance safely — Let Melitta Passione OT finish its normal shutdown, unplug it, allow hot surfaces to cool and empty the drip tray before removing an accessible part.
3. Carry out the official user check — With the appliance on and idle, remove the drip-tray drawer, empty and clean it, then reinstall it fully. 4. Interpret one controlled retest — Refit Melitta Passione OT exactly as documented and perform one short rinse or drink test. The cited Melitta Passione OT manufacturer documentation links “drip-tray symbol stays on after emptying” to the user-level procedure described here.
Before checking Melitta Passione OT F53/1-101
- Protect Melitta Passione OT's electrical openings and grinder from water; a brew unit, valve or hot steam fitting that resists must not be forced.
What this symptom can mean on Melitta Passione OT F53/1-101
4 checks for Melitta Passione OT F53/1-101, starting with Confirm the model and signal
- Confirm the model and signal
Confirm that the displayed or observed condition exactly matches “drip-tray symbol stays on after emptying” before changing anything.
- Prepare the appliance safely
Let Melitta Passione OT finish its normal shutdown, unplug it, allow hot surfaces to cool and empty the drip tray before removing an accessible part.
- Carry out the official user check
With the appliance on and idle, remove the drip-tray drawer, empty and clean it, then reinstall it fully.
- Interpret one controlled retest
Refit Melitta Passione OT exactly as documented and perform one short rinse or drink test. If “drip-tray symbol stays on after emptying” returns, stop resetting and arrange service.
When to stop checking Melitta Passione OT F53/1-101
- End the Melitta Passione OT check if “drip-tray symbol stays on after emptying” persists, the grinder is obstructed, hot water leaks or power trips; those signs require service.
Next step
Choose the next step for Melitta Passione OT F53/1-101
For “Melitta Passione OT: drip-tray symbol stays on after emptying”, base the decision on the documented sequence beginning with “Confirm the model and signal”, not on the warning or symptom alone.
Start with Confirm the model and signal
Work through all 4 checks for Melitta Passione OT F53/1-101. If normal operation returns and no warning sign remains, the diagnosis ends without ordering a part.
Stop the Melitta Passione OT F53/1-101 check at a warning sign
Use the stop conditions above for “Melitta Passione OT: drip-tray symbol stays on after emptying”. A qualified diagnosis should come before replacing the appliance whenever repair safety or feasibility is uncertain.
Sources used
- Melitta · source in French — The cited Melitta Passione OT manufacturer documentation links “drip-tray symbol stays on after emptying” to the user-level procedure described here.
Last checked: 30 August 2026