Whirlpool WFW560CHW4 — F3E6: accelerometer self-test or orientation fault. F3E6 identifies the accelerometer's self-test or orientation path, not ordinary load imbalance that clears after redistribution. Preserve the exact display, programme stage and behaviour before changing anything. Record the code and confirm only that the cabinet stands level and stable; make one reset, then stop and request service instead of removing panels or sensor mounts. Stop the cycle, wait for complete drum rest and safe cooling, isolate power and close both water taps before any accessible check. Drain retained water only by the model's documented method; never open the cabinet, reach below, bypass a lock or energise exposed parts.
Models covered
Safety first
- Stop the cycle, wait for complete drum rest and safe cooling, isolate power and close both water taps before any accessible check. Drain retained water only by the model's documented method; never open the cabinet, reach below, bypass a lock or energise exposed parts.
What the symptom may indicate
Checks in the right order
- Capture the starting point
Photograph or note “F3E6: accelerometer self-test or orientation fault”, the selected programme, remaining water and what happened immediately before it.
- Make the appliance safe
Stop the cycle, wait for complete drum rest and safe cooling, isolate power and close both water taps before any accessible check. Drain retained water only by the model's documented method; never open the cabinet, reach below, bypass a lock or energise exposed parts.
- Follow the official user check
Record the code and confirm only that the cabinet stands level and stable; make one reset, then stop and request service instead of removing panels or sensor mounts.
- Retest once and decide
If the exact condition clears, observe one supervised normal cycle. If it returns, preserve the evidence and use authorised service rather than repeating resets or guessing a part.
Stop and get qualified help when
- Stop immediately for smoke, burning smell, a hot plug, damaged cable, breaker trip, uncontrolled filling, external water, a door opening during motion, violent movement or the exact fault returning after one documented test.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 4 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Whirlpool — Whirlpool's official manual, support article or exact model page documents “F3E6: accelerometer self-test or orientation fault” and the bounded user action retained here.
- Whirlpool — Whirlpool's official manual, support article or exact model page documents “F3E6: accelerometer self-test or orientation fault” and the bounded user action retained here.
Last checked: 30 August 2026