Your appliance
Check the three documented Melitta F300-101 references: tray front 6769636, milk nozzle 6777693 and hose connector 6777695.
The Latticia OT F300-101 page is deliberately limited to three documented references: drip-tray front 6769636, Latticia milk nozzle 6777693 and hose connector 6777695. The float 6769612 and complete drip tray 6770228 shown for F300-100 are not included in this model record, so they must not be inferred from the shared Latticia name.
Documented matches for this model
Confirmed parts for Melitta Latticia OT F300-101: 6769636, 6777693, 6777695. Each match keeps its model details, applicable regions and source.
Buying options appear beside the matching part when they are available.
Melitta official purista drip-tray front, reference 6769636. Compatibility is published only for the exact appliance codes explicitly listed by the manufacturer source.
Melitta official latticia milk nozzle, reference 6777693. Compatibility is published only for the exact appliance codes explicitly listed by the manufacturer source.
Melitta official latticia hose connector, reference 6777695. Compatibility is published only for the exact appliance codes explicitly listed by the manufacturer source.
Verified compatibility
The official Melitta source explicitly links reference 6769636 to Melitta model code F300-101 or to the model-code family listed on this page.
Melitta — View at the manufacturer · source in FrenchLast checked: 29 August 2026The official Melitta source explicitly links reference 6777693 to Melitta model code F300-101 or to the model-code family listed on this page.
Melitta — View at the manufacturer · source in FrenchLast checked: 29 August 2026The official Melitta source explicitly links reference 6777695 to Melitta model code F300-101 or to the model-code family listed on this page.
Melitta — View at the manufacturer · source in FrenchLast checked: 29 August 2026Availability and references can vary by country. Compare the complete reference before ordering.
For Solo Perfect Milk, Purista, Latticia OT and Barista TS Smart, a brew unit that will not reinsert usually means the drive or unit is not in its home position.
Start diagnosisOn Purista and Latticia OT, the descaling symbol clears only after the complete model-specific programme, including its rinse phase, has finished.
Start diagnosisMelitta Latticia OT: the final quick-water rinse was not completed after the milk-system cleaning sequence, so both symbols remain active. On Melitta Latticia OT, treat “clean the milk system when Clean and Steam stay lit” as a diagnosis to confirm before choosing a part or requesting service.
Start diagnosisOn the Melitta Latticia OT, the grinder control sits behind the right-hand cover. Start one coffee first, wait until grinding is audible, then move the lever by one click only: left for finer, right for coarser.
Start diagnosisOn Melitta Latticia OT F300, the exact state “milk-system cleaning ends with cleaner still in the cup” is documented by Melitta; preserve its display, timing and operating condition before troubleshooting. Rinse and clean the milk path exactly as the manual states, including the final clean-water rinse.
Start diagnosisOn Melitta Latticia OT F300, the exact state “coffee flow becomes progressively slower” is documented by Melitta; preserve its display, timing and operating condition before troubleshooting. Adjust the grinder only while it is running, one click at a time, and judge the result after at least two coffees.
Start diagnosis