Models covered

Do not cut power during the normal overrun; request service only if it runs indefinitely, scrapes… Preserve the exact words, code, timing and drink before changing anything: a similar symptom can have a different cause. Perform the documented check once, then use the result to decide between a resolved user condition and authorised service. Do not order a pump, grinder, valve, heater or control board from this symptom alone.

Before checking Miele CVA 7845 DirectWater

  • Keep hands clear of hot water, steam, the grinder and moving brew mechanisms. Switch off and unplug before removing a user-removable unit, and never open an electrical, boiler, pump or grinder cover.

What this symptom can mean on Miele CVA 7845 DirectWater

What the display or symptom meansThe CVA can ventilate after the display switches off to remove internal moisture; brief continued running is normal dehumidification.
What it does not proveThe display or symptom does not by itself identify an internal replacement part. Water, coffee, milk, heat and electrical paths must remain separate diagnoses.

4 checks for Miele CVA 7845 DirectWater, starting with Preserve the exact evidence

  1. Preserve the exact evidence

    Photograph or write down “Fan continues after switch-off”, the selected drink and what happened immediately before it.

  2. Make the machine safe

    Keep hands clear of hot water, steam, the grinder and moving brew mechanisms. Switch off and unplug before removing a user-removable unit, and never open an electrical, boiler, pump or grinder cover.

  3. Apply the manufacturer’s user check

    Leave the ventilation openings clear and allow the fan to stop by itself. Do not cut power during the normal overrun; request service only if it runs indefinitely, scrapes or smells hot.

  4. Decide after one controlled test

    If the exact symptom clears, observe one normal drink. If it returns, keep the evidence and contact the manufacturer rather than repeating resets or guessing a part.

When to stop checking Miele CVA 7845 DirectWater

  • Stop immediately for a hot plug, damaged cable, burning smell, smoke, uncontrolled heating, water near electrical parts, a forcefully moving portafilter or any exact fault that returns after the one documented check.

Next step

After checking Miele CVA 7845 DirectWater: repair, part or service?

Treat “CVA 7845 DirectWater: Fan continues after switch-off” as a condition to verify. The first of the 4 documented checks is “Preserve the exact evidence”; its result guides what follows.

Finish the checks before buying

Complete the Miele CVA 7845 DirectWater sequence, starting at “Preserve the exact evidence”. When the symptom clears without a remaining alert, no replacement is indicated.

Arrange a diagnosis if a stop condition appears

Do not condemn Miele CVA 7845 DirectWater from “CVA 7845 DirectWater: Fan continues after switch-off” alone. Stop at the warnings above and let a qualified diagnosis establish whether repair remains safe and proportionate.

Sources used

  • Miele — Miele's official material documents “Fan continues after switch-off” or the exact symptom and the bounded user procedure retained here.
  • Miele · source in French — Miele's official material documents “Fan continues after switch-off” or the exact symptom and the bounded user procedure retained here.

Last checked: 30 August 2026