Water appearing at the lower EWF146118W door only as laundry tumbles calls for a gasket-fold, trapped-item and glass-cleanliness check. Keep the diagnosis at user level: record the exact stage, change one condition at a time and do not open the cabinet. A coin, hairpin, fabric edge or detergent film can prevent the flexible seal from contacting the glass evenly. Dry the front and watch from outside: a trail starting at the door differs from water descending from the detergent drawer above. Stop, close the taps, wait for unlock, remove trapped items, wipe glass and every accessible gasket fold with a damp cloth and inspect for visible cuts without pulling the seal. Test one short rinse with no laundry while watching. Any active leak or visible tear means stop, keep the taps closed and book service.
Models covered
Safety first
- Cancel the programme, unplug the washer, close the taps and let retained water cool. Never force a locked door or lid, bypass an interlock or remove a panel.
What the symptom may indicate
Checks in the right order
- Confirm before acting
A coin, hairpin, fabric edge or detergent film can prevent the flexible seal from contacting the glass evenly.
- Make the appliance safe
Cancel the programme, unplug the washer, close the taps and let retained water cool. Never force a locked door or lid, bypass an interlock or remove a panel.
- Apply the official check
Stop, close the taps, wait for unlock, remove trapped items, wipe glass and every accessible gasket fold with a damp cloth and inspect for visible cuts without pulling the seal.
- Retest once and decide
Test one short rinse with no laundry while watching. Any active leak or visible tear means stop, keep the taps closed and book service.
Stop and get qualified help when
- Stop for water under the washer, a damaged hose, burning smell, a hot plug, violent metal noise or a symptom that returns after the single documented test.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 4 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Electrolux — Electrolux's official support material documents this exact symptom path for EWF146118W; the procedure here keeps only user-accessible checks.
Last checked: 30 August 2026