FilterenceHome & Garden
Wet-dry floor-cleaner maintenance illustration for Kärcher FC 5 Cordless and FC 7: All LEDs flash quickly: wrong or faulty charging cable
Category illustration

Help · Floor cleaner

Kärcher FC 5 Cordless and FC 7: All LEDs flash quickly: wrong or faulty charging cable

For Kärcher FC 5 Cordless and FC 7, “All LEDs flash quickly: wrong or faulty charging cable” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check.

Manufacturer sources consulted

Models covered

Before checking Kärcher Floor cleaner

  • Switch off and unplug or undock the cleaner before opening a tank, cover or brush area. Wipe spills at once, keep liquids away from charging contacts and never run the machine with a safety cover removed.

What this symptom can mean on Kärcher Floor cleaner

Meaning of this exact indicationKärcher's official material anchors this branch with the exact wording “All LEDs flashing quickly indicates the charging cable is faulty or is the wrong one.”. That wording identifies the documented condition; it does not by itself prove that a battery, motor, board, sensor, dock or other replaceable component has failed.
Keep this intent separateKeep “All LEDs flash quickly: wrong or faulty charging cable” separate from every other alert on the same appliance. Match the full number, colour, flash order, spoken phrase or display text before acting; a different pattern owns a different diagnosis and may have a different stop condition.

4 checks for Kärcher Floor cleaner, starting with Confirm the exact code or pattern

  1. Confirm the exact code or pattern

    For Kärcher FC 5 Cordless and FC 7, “All LEDs flash quickly: wrong or faulty charging cable” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check.

  2. Make the appliance safe

    Switch off and unplug or undock the cleaner before opening a tank, cover or brush area. Wipe spills at once, keep liquids away from charging contacts and never run the machine with a safety cover removed.

  3. Perform the official user check

    Disconnect charging immediately and compare the charger identity with the one specified for the exact model. Do not test a look-alike supply; use only the original Kärcher charger, and seek service if that charger triggers the same pattern.

  4. Retest once and decide

    If the exact “All LEDs flash quickly: wrong or faulty charging cable” condition clears and the appliance completes one normal start, charge or cleaning cycle, stop the test and monitor it. If it returns unchanged, do not repeat resets or infer a part: record the code, model and serial number for authorised Kärcher support.

When to stop checking Kärcher Floor cleaner

  • Stop immediately for liquid near a plug, charger or battery, a tank or body leak, burning smell, smoke, hot cable, damaged cover, uncontrolled brush movement, or the same alert after the one documented test. Use authorised service. If the exact “All LEDs flash quickly: wrong or faulty charging cable” condition clears and the appliance completes one normal start, charge or cleaning cycle, stop the test and monitor it. If it returns unchanged, do not repeat resets or infer a part: record the code, model and serial number for authorised Kärcher support.

Next step

Choose the next step for Kärcher Floor cleaner

For “Kärcher FC 5 Cordless and FC 7: All LEDs flash quickly: wrong or faulty charging cable”, base the decision on the documented sequence beginning with “Confirm the exact code or pattern”, not on the warning or symptom alone.

Start with Confirm the exact code or pattern

Work through all 4 checks for Kärcher Floor cleaner. If normal operation returns and no warning sign remains, the diagnosis ends without ordering a part.

Stop the Kärcher Floor cleaner check at a warning sign

Use the stop conditions above for “Kärcher FC 5 Cordless and FC 7: All LEDs flash quickly: wrong or faulty charging cable”. A qualified diagnosis should come before replacing the appliance whenever repair safety or feasibility is uncertain.

Sources used

  • Kärcher — Kärcher's official FC 5/FC 7 FAQs for Kärcher FC 5 Cordless and FC 7 states exactly: “All LEDs flashing quickly indicates the charging cable is faulty or is the wrong one.” This short quotation is the source anchor for this intent.

Last checked: 30 August 2026