Your appliance
For Kärcher FC 7 Cordless, this catalogue documents 3 parts and accessories across Brushes & rollers, Care products. Reference: 2.055-006.0, 2.055-021.0, 6.295-944.0.
Documented matches for this model
Confirmed parts for Kärcher FC 7 Cordless: 2.055-006.0, 2.055-021.0, 6.295-944.0. Each match keeps its model details, applicable regions and source.
Buying options appear beside the matching part when they are available.
Kärcher official yellow multi-surface fc roller set, reference 2.055-006.0. Compatibility is published only for the exact appliance codes explicitly listed by the manufacturer source.
Kärcher official fc stone-floor roller set, reference 2.055-021.0. Compatibility is published only for the exact appliance codes explicitly listed by the manufacturer source.
Kärcher official fc universal floor cleaner 500 ml, reference 6.295-944.0. Compatibility is published only for the exact appliance codes explicitly listed by the manufacturer source.
Verified compatibility
The official Kärcher source explicitly links reference 2.055-006.0 to Kärcher model code FC 7 Cordless or to the model-code family listed on this page.
Kärcher — View at the manufacturerLast checked: 29 August 2026The official Kärcher source explicitly links reference 2.055-021.0 to Kärcher model code FC 7 Cordless or to the model-code family listed on this page.
Kärcher — View at the manufacturer · source in GermanLast checked: 29 August 2026The official Kärcher source explicitly links reference 6.295-944.0 to Kärcher model code FC 7 Cordless or to the model-code family listed on this page.
Kärcher — View at the manufacturerLast checked: 29 August 2026Availability and references can vary by country. Compare the complete reference before ordering.
If an FC7 asks for water although the fresh-water tank is full, the manual points to a dirty holder sensor or unsuitable distilled water before any internal fault.
Start diagnosisIf FC7 rollers stop and level indicators flash, the manual points to a motor blockage, excessive pressure, trapped debris or incorrectly fitted rollers and hair filters.
Start diagnosisA flashing battery display with FC7 shutdown can be thermal protection caused by heat, dry rollers or use on carpet.
Start diagnosisPoor water pickup on a Kärcher FC7 can follow misfitted hair filters or worn rollers that no longer contact the floor correctly.
Start diagnosisDirty water leaking from an FC7 can mean a full or mis-seated tank, incorrectly fitted hair filters or a damaged reservoir.
Start diagnosisA loud rattling FC7 can result from rollers that are too dry or deformed after incorrect storage rather than an internal motor failure.
Start diagnosisKärcher FC 7 Cordless poor cleaning result with too much foam: use the checks below to separate excessive detergent or residue from worn rollers or a water-delivery fault before ordering a part.
Start diagnosisFor Kärcher FC 5 Cordless and FC 7, “Battery does not charge: connector and outlet check” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check.
Start diagnosisFor Kärcher FC 5 Cordless and FC 7, “All LEDs flash quickly: wrong or faulty charging cable” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check.
Start diagnosisFor Kärcher FC 5 Cordless and FC 7, “Will not switch on while the charging cable is connected” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check.
Start diagnosisFor Kärcher FC 7, “Level 1 and 2 lights run top to bottom during rinsing” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check.
Start diagnosisFor Kärcher FC 7, “Automatic shutdown from a full dirty tank or excess foam” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check.
Start diagnosisFor Kärcher FC 7, “Cleaner catches in floor joints” is a distinct manufacturer-documented diagnostic intent. This page preserves the exact code or light pattern, groups every applicable catalog model and limits action to the official safe user check.
Start diagnosisKärcher FC cordless cleaners showing “Battery LED flashes at start: battery is empty” has a specific manufacturer-backed troubleshooting path. Match the exact light, sound or behaviour before cleaning, resetting or ordering anything.
Start diagnosisKärcher FC 7 showing “Rollers stay too dry: check the fresh-water filter” has a specific manufacturer-backed troubleshooting path. Match the exact light, sound or behaviour before cleaning, resetting or ordering anything.
Start diagnosisKärcher FC 7 showing “Streaks after cleaning without excess foam” has a specific manufacturer-backed troubleshooting path. Match the exact light, sound or behaviour before cleaning, resetting or ordering anything.
Start diagnosis