Models covered: CM 7550, CM 7750, CVA 7845, CM 6160, CM 6360 and CM 6560. This message is documented across the listed CM/CVA models, but built-in and countertop machines do not always share the same removable-unit procedure. Follow the manual tied to the exact model code. On Miele CM and CVA coffee machines, “no milk or froth from the central spout” should be checked with the official user procedure before any part is considered. The exact display or behaviour is a diagnostic clue, not proof that a pump, grinder, heater or control board has failed. Keep the model code, displayed wording and test conditions unchanged. A different warning, external leak, burning smell or hard mechanical noise is a different and unsafe path. Check the milk pipe seams and rinse-valve orientation, then brush the removable central spout and milk pipework exactly as shown. Milk flow after cleaning confirms assembly or blockage; no draw or escaping steam needs Miele service.
Models covered
- Miele CM 7550 CoffeePassion · CM 7550
- Miele CM 7750 CoffeeSelect · CM 7750
- Miele CVA 7845 DirectWater · CVA 7845
- Miele CM 6160 MilkPerfection · CM 6160
- Miele CM 6360 MilkPerfection · CM 6360
- Miele CM 6560 MilkPerfection · CM 6560
Safety first
- Stop the drink, switch off, unplug where accessible and let hot water, steam and metal parts cool. Never open the housing, bypass an interlock or put fingers into a grinder.
What the symptom may indicate
Checks in the right order
- Confirm the model and symptom
On Miele CM and CVA coffee machines, “no milk or froth from the central spout” should be checked with the official user procedure before any part is considered.
- Make the machine safe
Stop the drink, switch off, unplug where accessible and let hot water, steam and metal parts cool. Never open the housing, bypass an interlock or put fingers into a grinder.
- Apply the official check
Check the milk pipe seams and rinse-valve orientation, then brush the removable central spout and milk pipework exactly as shown.
- Retest once and decide
Milk flow after cleaning confirms assembly or blockage; no draw or escaping steam needs Miele service.
Stop and get qualified help when
- Stop immediately for an external leak, dry-running pump, burning smell, hot plug, damaged cable, uncontrolled steam or a fault that returns after the single documented test.
Next step
Repair, replace a part, or arrange a diagnosis?
Use the checks and stop conditions above to choose a cautious next step. A symptom alone never proves that the appliance has failed.
Resolve it without buying anything
Complete the 4 user-accessible checks in order. If normal operation returns and no warning sign remains, no replacement is indicated.
Replace only the confirmed part
If the checks isolate a worn or blocked component, match its complete reference to the exact appliance model before ordering.
This guide does not identify a replacement part. Do not order a generic component from the symptom alone.
Arrange a diagnosis before replacing the appliance
Stop at any warning sign listed above. A qualified diagnosis should confirm that repair is unsafe, unavailable or uneconomical before an appliance replacement is considered.
Sources used
- Miele — Miele's official Problem solving guide for CM 7550 CoffeePassion states exactly: “Neither milk nor milk froth comes out of the central spout.”.
- Miele — Miele's official Problem solving guide for CM 7750 CoffeeSelect states exactly: “Neither milk nor milk froth comes out of the central spout.”.
- Miele — Miele's official Problem solving guide for CVA 7845 DirectWater states exactly: “Neither milk nor milk froth comes out of the central spout.”.
- Miele — Miele's official Problem solving guide for CM 6560 MilkPerfection states exactly: “Neither milk nor milk froth comes out of the central spout.”.
Last checked: 30 August 2026
