FilterenceHome & Garden
Coffee-machine maintenance illustration for Sage BES876: Grinder time out
Category illustration

Help · Coffee machine

Sage BES876: Grinder time out

Very fine coffee is loading the grinder long enough for the BES876 to end the grind cycle on time-out. Stop, unplug and let the grinder settle, then clean the accessible conical burrs with the supplied tools and return to a coarser documented setting; never add water.

Manufacturer sources consulted

Models covered

Sage BES876 — Grinder time out. Preserve the exact display, drink and timing, then perform the official check once.

Before checking Sage Barista Express Impress BES876 / Breville

  • Keep hands away from hot water, steam, the grinder and moving brew parts. Switch off and unplug before removing a user-removable part; never open the housing, boiler, pump or grinder.

What this symptom can mean on Sage Barista Express Impress BES876 / Breville

What this exact symptom meansVery fine coffee is loading the grinder long enough for the BES876 to end the grind cycle on time-out.
Keep neighbouring faults separateThis guide is limited to “Grinder time out”; a leak near electricity, a dry pump, uncontrolled steam or a different display requires its own path.

4 checks for Sage Barista Express Impress BES876 / Breville, starting with Capture the starting point

  1. Capture the starting point

    Photograph or note “Grinder time out”, the selected drink and what happened immediately before it.

  2. Make the machine safe

    Keep hands away from hot water, steam, the grinder and moving brew parts. Switch off and unplug before removing a user-removable part; never open the housing, boiler, pump or grinder.

  3. Follow the manufacturer check

    Stop, unplug and let the grinder settle, then clean the accessible conical burrs with the supplied tools and return to a coarser documented setting; never add water.

  4. Retest once and decide

    If the exact symptom clears, observe one normal drink. If it returns, preserve the evidence and contact authorised support instead of repeating resets or guessing a part.

When to stop checking Sage Barista Express Impress BES876 / Breville

  • Stop immediately for a hot plug, damaged cable, burning smell, smoke, water near electrical parts, uncontrolled steam, a dry-running pump, a part moving under pressure or the exact fault returning after one documented test.

Next step

What the Sage Barista Express Impress BES876 / Breville checks lead to

The 4-check path for “Sage BES876: Grinder time out” starts with “Capture the starting point” and separates a resolved condition, an identified part and a case requiring service.

No purchase after a successful check

Follow the Sage Barista Express Impress BES876 / Breville controls in order. If “Capture the starting point” and the remaining checks restore normal operation with no warning, stop without replacing anything.

Escalate only on the documented warning signs

For “Sage BES876: Grinder time out”, use the stop conditions above rather than the symptom by itself. Professional confirmation should precede any decision to replace Sage Barista Express Impress BES876 / Breville.

Sources used

  • Sage — Sage's official manual or model page documents “Grinder time out” and the bounded user procedure retained here.
  • Sage — Sage's official manual or model page documents “Grinder time out” and the bounded user procedure retained here.

Last checked: 30 August 2026