Your appliance
Confirm the genuine LatteCrema DLSC018 milk carafe for De’Longhi Dinamica Plus ECAM370.95.S before ordering.
Documented matches for this model
Confirmed parts for De’Longhi Dinamica Plus ECAM370.95.S: DLSC018. Each match keeps its model details, applicable regions and source.
Buying options appear beside the matching part when they are available.
Removable auto-clean milk carafe confirmed for selected ECAM 370.95 and 376.95 machines and suitable for refrigerator storage.
Verified compatibility
De’Longhi's official DLSC018 page lists ECAM 370.95 among the compatible machine references.
DeLonghi — View at the manufacturer · source in FrenchLast checked: 27 August 2026Availability and references can vary by country. Compare the complete reference before ordering.
No milk output and thin foam are different symptoms. On automatic carafe or tube systems, first check chilled milk, clean removable milk-path parts and confirm every tube and spout is seated.
Start diagnosisThe Dinamica Plus Water circuit empty message asks for a controlled fill, starting with a full and correctly seated tank.
Start diagnosisGround too fine on a Dinamica Plus means water crosses the coffee too slowly; adjustment must be made only while grinding.
Start diagnosisA sudden harsh grinder noise with no ground coffee can indicate a foreign object; never force or dismantle the burrs.
Start diagnosisDe’Longhi ECAM family: The removable brewing unit is absent or has not reached its seated position after cleaning. Switch off from the appliance control, remove the water tank, press the two coloured release buttons and slide the rinsed brewing unit in until both buttons click out; never force the drive.
Start diagnosisDe’Longhi ECAM family: The grounds counter has reached its limit; removing only the drip tray does not reset that counter. With the machine on, remove the drip-tray assembly, empty both tray and grounds container, clean them without immersing the electrical tray contacts and refit them together.
Start diagnosisDe’Longhi ECAM family: The complete tray assembly is not detected; the message is not a request to add beans. Check that the grounds container is nested in the clean drip tray, that neither piece is warped and that the complete dry assembly slides fully home.
Start diagnosisDe’Longhi ECAM family: A pre-ground recipe was selected but the funnel is empty, or more than the documented measure risks blocking it. Open the pre-ground funnel only for that recipe, add one level supplied measure and close it; do not add beans, soluble coffee or a second measure.
Start diagnosisDe’Longhi ECAM family: The selected rinse or hot-water operation needs the removable hot-water spout on the accessory connector. Confirm the requested operation, wipe the connector, push the correct hot-water spout straight in and place a heat-resistant cup beneath it before continuing.
Start diagnosisDe’Longhi ECAM family: A milk drink was requested while the compatible carafe is absent or not fully coupled. Fill only to its marked range, assemble the lid and intake tube, clean the connector and push the correct carafe straight in; never hold it by the delivery tube.
Start diagnosisDe’Longhi ECAM family: A cold cup, low recipe temperature or deposits in the accessible brewing path can cool the drink without proving a heater failure. Warm the cup with hot water, select the documented higher coffee-temperature setting and compare one identical black coffee after the machine is fully ready; do not measure a… Preserve the exact words, code, timing and drink before changing anything: a similar symptom can have a different cause.
Start diagnosis