Your appliance
Find the official 97393 water tank confirmed for Nespresso Vertuo Pop CV2 and DV2, with exact reference, exclusions and manufacturer source.
Documented matches for this model
Confirmed parts for Nespresso Vertuo Pop CV2 / DV2: 97393. Each match keeps its model details, applicable regions and source.
Buying options appear beside the matching part when they are available.
Replacement 0.6-litre water tank for Vertuo Pop machine types CV2 and DV2. The lid is not included.
Verified compatibility
Nespresso's official accessory page identifies SKU 97393 and states that this water tank fits Vertuo Pop machine types CV2 and DV2.
Nespresso — View at the manufacturerLast checked: 30 August 2026Availability and references can vary by country. Compare the complete reference before ordering.
Check the removable water tank, the locked machine head and the capsule before treating a silent or dry Vertuo Pop as a pump failure.
Start diagnosisThe orange cadence identifies whether Vertuo Pop needs an operating check, cleaning, cooling or a complete descaling and rinse cycle.
Start diagnosisDry the machine, identify whether the liquid starts at the removable tank, outlet or capsule head, then clean only the accessible areas.
Start diagnosisEmpty the used-capsule container, cool and unplug the machine, then remove only an accessible loose capsule without touching piercing parts.
Start diagnosisVertuo Pop CV2 / DV2: The Vertuo Pop may be in automatic standby or lack mains power; this page deliberately excludes orange-light cadence faults. Unlock the head, press the button once, check the plug, socket voltage and household fuse without opening the machine, and test one known-working socket if safe.
Start diagnosisVertuo Pop CV2 / DV2: A cold cup and scale can lower the delivered temperature even when capsule reading and flow are normal. Preheat the cup with hot water, use the recommended cup size and compare one black coffee; if still cool, complete the official descaling cycle before requesting service.
Start diagnosisVertuo Pop CV2 / DV2: The Vertuo Pop’s automatic energy-saving shutdown after about two minutes is normal, not a random power fault. Wake it with one button press and prepare the capsule only when ready to brew. Investigate power only if the button light also disappears during an active preparation.
Start diagnosisVertuo Pop CV2 / DV2: Residue around the capsule holder or coffee outlet can release grounds; this differs from a capsule that fails to eject. Eject the capsule, let the head cool and run the manual’s cleaning procedure twice with fresh water and no capsule; wipe only accessible surfaces with a soft damp cloth.
Start diagnosisVertuo Pop CV2 / DV2: A steady ready light with no start response points to capsule position or head locking, not to the existing blinking-light diagnosis. Open the head, remove the capsule, clean the visible holder, insert one undamaged Vertuo capsule dome down, close and lock fully, then press once.
Start diagnosisVertuo Pop CV2 / DV2: The Vertuo Pop descaling state cannot be cancelled by unplugging; the machine retains the unfinished cycle. Reconnect, refill as the manual requests and complete the remaining descaling and rinse stages. Do not repeat power cuts or start coffee until the machine exits the cycle normally.
Start diagnosis